Welcome: Ningbo Qisen Lighting Technology Co.,Ltd

News of LED Lighting

IP Ratings – What Are They And Why IP65 Light Fixture?

IP Ratings – What Are They And Why IP65 Light Fixture?

IP rating refers to ingress protection rating or international protection ratings, which are used to qualify levels of dust- and water-sealing effectiveness. It is crucial to consider IP ratings if you are purchasing fixtures for dusty or wet environments.

An IP rating is defined by the letters IP, followed by two numbers. Its sole purpose is to provide accurate information about the protection level an electrical fixture offers. The first number offers a scale of 0–6 and relates to the protection levels against solids like dirt, sand, dust, and debris, while the second number (0–8) represents protection against liquids like moisture and water. The higher the number, the greater the protection against solids and liquids.For an ip65 light fixture,its waterproof level can be 30cm under water.



Main Differences Between IP65, IP66, and IP67


Depending on your project, the differences between these three ratings can be very important. A fixture rated with any of the three of these ratings is equally protected against dust, dirt, sand, and debris (as indicated by the “6” digit). The liquid/water protection for each of these three ratings is unique.

· IP65 – Water resistant

· IP66 – Water resistant against powerful jets

· IP67 – Protected against complete temporary water submersion

Normally ip65 light fixture is used in underground parking lot,warehouse,food factory,clean room etc.

Which IP Rating Do I Need?


The answer to this question ultimately depends on the environment in which your fixtures will be installed. If your fixtures will be subjected to dust, sand, debris, or liquids, choosing a fixture with a higher IP rating is advised,such as ip65 light fixture. To decide which IP rating is suitable for your project, examine the space where the fixture will be placed. Typically, low IP ratings are used for areas such as indoor settings where jetting water will never be an issue. Temperature controlled areas like office buildings and municipal buildings would not require high IP ratings.  High-IP-rated,like ip65 light fixture are used for outdoor locations subjected to a greater amounts of liquids and dust, areas with a large footfall, wet locations, and unsealed locations, such as sports areas, beachfront areas, and dirty warehouses.


IP65 Light Fixtures

A fixture with an IP rating of 65 is protected against multi-directional, low-pressure water jets. In order to pass testing and achieve an IP65 rating, fixtures must be able to withstand water projected by a 0.25-inch nozzle. To achieve satisfactory results, this test must be run for a minimum of fifteen minutes, with the water source placed three yards from the fixture. Additionally, the water pressure must be 30 kPa with a water volume of 3.3 gallons per minute.

Ningbo Qisen Lighting Technology Co.,Ltd  has many ip65 light fixture in many styles and for many applications. Here are just some of the ip65 light fixture available for purchase.

· WPA – ip65 light fixture including Tridonic driver and Samsung LEDs inside,5 years warranty. 

· WPB – ip65 light fixture for T8 or T5 tubes,usually comes with empty housings.

· WPC– ip65 light fixture,extrusion design with quick waterproof connector,saving more labor cost.


Speak to Ningbo Qisen Lighting Technology Co.,Ltd about Choosing the Right Fixture

Ningbo Qisen Lighting Technology Co.,Ltd is your factory-direct source for all ip65 light fixture needed to suitably illuminate your property. We want to make sure you get the exact fixture for your needs, your budget, and your goals. We are passionate about lighting and love what we do—we’ll get you an answer. To speak with Ningbo Qisen Lighting Technology Co.,Ltd, send an email to sales@nbqisen.com or arthur.hfu@vip.163.com .



Contact: Michael Hfu


Tel: +86 158 8801 2031

Email: sales@nbqisen.com

Add: No 208,Hangzhou Bay Zone,Ningbo City,China

Scan the qr codeClose
the qr code